Stuck on Dell Splash Screen
If the computer is stuck on the Dell splash screen, you need to restart it.
You have two options to do this:
Option 1: Restarting from the Computer
1. Using a ladder, open the heart's cover to access the computer located inside. Once the cover is removed, press and hold the computer's power button for 10 seconds. When the computer turns off, press the power button again to restart it.
Note: If the issue persists, repeat this step one more time. If the problem continues, proceed to the second option.
Option 2: Restarting from the Breaker
- Turn off the projector.
- Turn off the electric breaker that the Lü system is connected to and wait for 2 minutes.
- Turn the breaker back on. The computer should boot automatically.
Related Articles
If your Lü is not turning on
Step 1 - Check the projector source Make sure the projector is set to the correct input source. Press the “HDMI 1” button on the top of the projector remote to select HDMI 1. If there’s no response, try pressing “HDMI 2” instead. Step 2 - Activate ...How to update drivers and BIOS for Dell computer
Regularly updating drivers and the BIOS helps ensure that your computer runs smoothly, remains secure, and takes full advantage of the latest hardware and software advancements. Here's how you can update them: 1. Identify your computer's model: 1. ...Lü 1st generation - Change the image ratio
If any part of the screen does not display correctly in the projection, the aspect ratio may have been accidentally changed. To change the image ratio and thus have a full screen, press the Aspect button using the projector remote control and choose ...Optimal Projector Adjustment
Once the auto-adjustment is complete, the following options will appear on screen : If the size, positioning, and focus of the projection are satisfactory, press OK. Otherwise, you can: Press Esc to retry automatic adjustment. Press Play to proceed ...Correcting Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If ...