Lü 1st generation - Change the image ratio
If any part of the screen does not display correctly in the projection, the aspect ratio may have been accidentally changed.
To change the
image ratio and thus have a full screen, press the Aspect button using the
projector remote control and choose Auto mode.
The camera will need to be calibrated if you have changed the projection ratio.
Follow this link to get some help with the camera calibration : How to calibrate the camera
Related Articles
Change the color of the projector image
If the color of your projector seems to have changed, press the Color Mode button using the projector remote control. We recommend that you select the Dynamic mode. Press the “Color Mode” button multiple time on the remote control to select another ...Correcting Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If ...If your Lü is not turning on
Step 1 - Check the projector source Make sure the projector is set to the correct input source. Press the “HDMI 1” button on the top of the projector remote to select HDMI 1. If there’s no response, try pressing “HDMI 2” instead. Step 2 - Activate ...Optimal Projector Adjustment
Once the auto-adjustment is complete, the following options will appear on screen : If the size, positioning, and focus of the projection are satisfactory, press OK. Otherwise, you can: Press Esc to retry automatic adjustment. Press Play to proceed ...Stuck on Dell Splash Screen
If the computer is stuck on the Dell splash screen, you need to restart it. You have two options to do this: Option 1: Restarting from the Computer 1. Using a ladder, open the heart's cover to access the computer located inside. Once the cover is ...