If the base is too close or too far from the wall

If the base is too close or too far from the wall


When the projector is turned on, the system may indicate that the unit is too close or too far from the wall.
Before proceeding, it is important to properly reposition the unit to ensure an optimal experience.

A) Your unit is too close, you must move it away from the wall
 
B) Your unit is too far, you must move it closer from the wall 

Please consult the complet user manual to find out the best way to do it.

Before moving the unit:

  • Refer to Section 5.6 – Handling Safety to review the safety instructions.

  • It is essential to fully remove the head from the base before moving the unit to avoid injury or equipment damage.

  • Refer to Section 12 – Disassembly to follow the proper procedure.


Still have questions? Contact us!


      • Related Articles

      • Möve - How to calibrate the camera

        Calibration guide for accurate ball detection with a Möve configuration Calibration is necessary when the detection of the ball on the wall is inaccurate or when there are false detections. This usually occurs when the camera is hit by a ball. Even a ...

      • If your Möve does not turn on

        Make sure that: the power cable is properly plugged in, the power switch is in the ON position, and the head is properly locked into the base. Turn on the projector using the projector controller. If the problem persists, refer to Section 18 – ...

      • Optimal projection and playground area for best experience

        Projection Recommended dimensions: 6 m (20’) wide × 3.4 m (11’) high Minimum recommended dimensions: 3.7 m (12’) wide × 2 m (6.75’) high Aspect ratio: 16:9 Note: The projection surface must be rigid, flat, and as light-colored as possible. The ...

      • If auto-calibration fails

        If automatic calibration is successful, you will be redirected to the Lü home screen. However, in case of failure, the system will offer the option to proceed with manual calibration. Follow the on-screen instructions to manually calibrate the ...

      • How to adjust your projector for optimal experience

        There are different options available to adjust your projected image: Four Dots Adjust: Use this setting to correct the shape and size of an image that is not perfectly rectangular. Zoom: Resize the projected image. Focus: Adjust the sharpness of the ...