Optimal projection and playground area for best experience

Optimal projection and playground area for best experience

Projection

Recommended dimensions: 6 m (20’) wide × 3.4 m (11’) high

Minimum recommended dimensions: 3.7 m (12’) wide × 2 m (6.75’) high

Aspect ratio: 16:9


Note:

A) The projection surface must be rigid, flat, and as light-colored as possible.
B) The distance between Möve and the wall determines the projection width: the farther the unit is, the larger the projection area.
C) The larger the projection surface and play area, the better the user experience.
D) For smaller spaces (distance or ceiling height), the play and projection area dimensions will be reduced. The minimum recommended size for an optimal experience is 12’.
E) The projection aspect ratio must be 16:9.

Playground Area

Recommended dimensions: 3.7 m (12’) wide × 6 m (20’) long

Minimum dimensions: 3.7 m (12’) wide × 3.7 m (12’) long


Minimum ceiling height: 2.4 m (8’)


Recommended ceiling height: 3.7 m (12’)

Placement: Centered between the projection and the Möve unit


Good to know:

  • To maximize immersion, ambient lighting should be adjustable.

  • For an optimal experience, lights should be turned off while the system is in use.

  • Windows should be covered to block natural light.


Still have questions? Contact us!

      • Related Articles

      • Optimal Projector Adjustment

        Once the auto-adjustment is complete, the following options will appear on screen : If the size, positioning, and focus of the projection are satisfactory, press OK. Otherwise, you can: Press Esc to retry automatic adjustment. Press Play to proceed ...

      • Recommended position for the base

        When the projector is turned on, the system may indicate that the unit is too close or too far from the wall. Before proceeding, it is important to properly reposition the unit to ensure an optimal experience. A) Your unit is too close, you must move ...

      • Quick Start Guide and User Guide

        Attached are two essential resources to help you get started with your Möve: Quick Start Guide: This document walks you through the setup and initial use of the system, perfect for getting started quickly. User Guide: A complete guide covering all ...

      • Möbil - How to setup your unit

        To learn how to set up the Möbil unit, please watch this video : https://vimeo.com/797792958 You can also consult the User Guide attached to this article. Still have questions? Contact us!

      • Möve - How to calibrate the camera

        Calibration guide for accurate ball detection with a Möve configuration Calibration is necessary when the detection of the ball on the wall is inaccurate or when there are false detections. This usually occurs when the camera is hit by a ball. Even a ...