Calibrate the camera

Calibrate the camera

If automatic calibration is successful, you will be redirected to the Lü home screen.

However, in case of failure, the system will offer the option to proceed with manual calibration.

Follow the on-screen instructions to manually calibrate the camera:

  • A cross must be placed at each corner of the projection. Use the camera view to properly position the corners.

  • Each cross has a specific color, indicated in the text displayed on screen.

  • Use the arrow keys on the remote keyboard to move the first cross to the correct position.

  • Press OK once the cross is correctly placed to move to the next one.

  • After placing all four crosses, press OK again to complete the calibration.


Still have questions? Contact us!

      • Related Articles

      • Möve - How to calibrate the camera

        Calibration guide for accurate ball detection with a Möve configuration Calibration is necessary when the detection of the ball on the wall is inaccurate or when there are false detections. This usually occurs when the camera is hit by a ball. Even a ...

      • How to calibrate the camera

        Calibration guide for accurate ball detection Calibration is necessary when the detection of the ball on the wall is inaccurate or when there are false detections. This usually occurs when the camera is hit by a ball. Even a slight movement of the ...

      • Camera not detected

        Follow the steps below in order, according to your Lü model if a notification indicates that the camera is not detected, Lü – 2nd Generation 1. Go to the Status section in Lü Settings and click Restart the camera. 2. Restart the system. 3. Update the ...

      • Optimal projection and playground area for best experience

        Projection Recommended dimensions: 6 m (20’) wide × 3.4 m (11’) high Minimum recommended dimensions: 3.7 m (12’) wide × 2 m (6.75’) high Aspect ratio: 16:9 Note: A) The projection surface must be rigid, flat, and as light-colored as possible. B) The ...

      • Recommended position for the base

        When the projector is turned on, the system may indicate that the unit is too close or too far from the wall. Before proceeding, it is important to properly reposition the unit to ensure an optimal experience. A) Your unit is too close, you must move ...