Flickering projection

Flickering projection

If you are experiencing flickering on the projector, please follow these steps:

Step 1: Adjust HDMI IN EQ Level

  1. On the projector remote (the small white one), press the Menu button.

  2. Navigate to Signal I/O > HDMI IN EQ Level.

  3. Make sure the HDMI1 source is selected.

  4. Set the EQ level to Medium.

Note:
Medium is usually the correct setting. However, depending on your setup, Low or High might work better. If Medium doesn't help, try Low or High.
If there's no improvement, please revert to Medium.

Step 2: Try Image Enhancement Settings

If the flickering persists:

  1. Press Menu on the remote.

  2. Navigate to Image > Image Enhancement > Noise Reduction.

  3. By default, the setting is at 6. Try increasing or decreasing this value to see if it improves the issue.

Step 3: If the Issue Continues

If none of the above steps resolve the flickering, the problem may be hardware-related. Please contact our support team for further assistance.



Still have questions? Contact us!

      • Related Articles

      • Projection Adjustment Options - How to adjust your projector

        There are different options available to adjust your projected image: Four Dots Adjust: Use this setting to correct the shape and size of an image that is not perfectly rectangular. Zoom: Resize the projected image. Focus: Adjust the sharpness of the ...

      • If your Lü is not turning on

        Step 1 - Check the projector source Make sure the projector is set to the correct input source. Press the “HDMI 1” button on the top of the projector remote to select HDMI 1. If there’s no response, try pressing “HDMI 2” instead. Step 2 - Activate ...

      • Change the color of the projector image

        If the color of your projector seems to have changed, press the Color Mode button using the projector remote control. We recommend that you select the Dynamic mode. Press the “Color Mode” button multiple time on the remote control to select another ...

      • Correcting Image Shape with Quick Corner

        You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If ...

      • Lü 1st generation - Change the image ratio

        If any part of the screen does not display correctly in the projection, the aspect ratio may have been accidentally changed. To change the image ratio and thus have a full screen, press the Aspect button using the projector remote control and choose ...