Disassembly instructions

Disassembly instructions

Before any use, please follow these instructions carefully to ensure proper disassembly of the system and to avoid accidents.


      1. Shutting Down the Computer

A) Using the remote control, hold down the Power button for 3 seconds to switch off the computer, or select the power icon, then choose “switch off system”.
B) Once the computer has been switched off, a blue screen will appear.



      2. Retracting the Head and Base

A) Press the down arrow ▼ to lower the head and retract the legs.

Note: The projector will turn off once the mast is fully lowered.

IMPORTANT: If the lights on the head are on, the mast will not retract.


      3. Power Off

A) Once the projector is off, turn off the base by switching the power switch to 0.
B) Disconnect the power cable from the base.
C) Disconnect the base’s power cable from the wall outlet.

      4. Removing the Head

A) With the help of another person, unlock the latch located on the side of the head, then slide the head outward while firmly holding the head’s handles.


      5. Storage

A) Store the head, base, and power cable in their respective transport cases.

Note: The power cable can be wrapped around the mast.

B) Turn off the remote keyboard, then place it back in the head’s transport case.
C) Close the transport cases.



Still have questions? Contact us!

      • Related Articles

      • Assembly Instructions

        Before any use, carefully follow these instructions of the complet user manual to ensure proper assembly of the system and avoid accidents. Note: Be cautious when handling the devices to avoid pinching hazards. It is recommended to carefully read the ...

      • Möbil - How to setup your unit

        To learn how to set up the Möbil unit, please watch this video : https://vimeo.com/797792958 You can also consult the User Guide attached to this article. Still have questions? Contact us!

      • If the base is too close or too far from the wall

        When the projector is turned on, the system may indicate that the unit is too close or too far from the wall. Before proceeding, it is important to properly reposition the unit to ensure an optimal experience. A) Your unit is too close, you must move ...

      • How to set up a remote session with Lü

        1. Go to play-lu.screenconnect.com 2. Enter the code provided by Lü 3. Download and install the file that appears after entering the code. 4. Once the installation is complete, please wait for someone from Lü to remotely access your system. Still ...

      • Internet connection

        Lü highly recommend having your Lü hard wired instead of the WI-FI for better stability. To ensure your Lü is properly connected to the internet, exit the Lü app by using the left panel or by pressing the WIN button on your Lü remote to access the ...