Lü Logo Help Center
Skip to content
  • There are no suggestions because the search field is empty.

Flickering projection

If you are experiencing flickering on the projector, please follow these steps:

Step 1: Adjust the HDMI IN EQ Level

  1. Using the small white remote (projector), press the Menu button.

  2. Navigate to Signal I/O > HDMI IN EQ Level.

  3. Make sure the HDMI1 source is selected.

  4. Set the EQ level to Medium.

Note:
Medium is generally the optimal setting. Depending on your specific setup, Low or High might work better. If Medium does not resolve the issue, try the other two options. If neither improves the situation, return the setting to Medium before proceeding.

Step 2: Adjust Image Enhancement Settings

If the flickering persists:

  1. Press Menu on the remote.

  2. Navigate to Image > Image Enhancement > Noise Reduction.

  3. By default, this is set to 6. Try increasing or decreasing this value to see if it reduces the flickering.

Step 3: Hardware Support

If none of the above steps resolve the flickering, the problem may be hardware-related. Please   Contact us! for further assistance.