Projection Adjustment Options - How to adjust your projector

Projection Adjustment Options - How to adjust your projector

There are different options available to adjust your projected image:

  • Four Dots Adjust: Use this setting to correct the shape and size of an image that is not perfectly rectangular.

  • Zoom: Resize the projected image.

  • Focus: Adjust the sharpness of the image using the focus buttons.

  • Shift: If the projector cannot be installed directly in front of the screen, use the lens shift feature to adjust the position of the projected image.


How to use "Four Digit Adjust"

  • Using the projector remote, press the “Menu” button.

  • Select the “Setup” tab.

  • Choose “Keystone”.

  • Use the left and right arrows to select “Four Dots Adjust”.

  • Press “OK” a second time.

  • Select the corner you want to adjust, then use the remote arrows to move it.

  • Once it is positioned correctly, press “OK” to save the adjustment.


How to use "Zoom"

  • Using the projector remote, press the “Zoom” button.

  • Select “Zoom”.

  • Use the left and right arrows to adjust the image as needed.


How to use "Focus"

  • Using the projector remote, press the “Focus” button.

  • Select “Focus”.

  • Use the left and right arrows to adjust the sharpness of the image.

How to use "Shift"

  • Using the projector remote, press the “Shift” button.

  • Select “Shift”.

  • Use the remote arrows to move the image to the desired position.


Still have questions? Contact us!

      • Related Articles

      • Flickering projection

        If you are experiencing flickering on the projector, please follow these steps: Step 1: Adjust HDMI IN EQ Level On the projector remote (the small white one), press the Menu button. Navigate to Signal I/O > HDMI IN EQ Level. Make sure the HDMI1 ...

      • Replacing the Keyboard - Remote

        Your keyboard remote can be replaced if it no longer works or has been damaged beyond use. To order a new keyboard remote, please visit https://play-lu.odoo.com/. After receiving the new remote, open the back panel to remove the USB receiver. This ...

      • Troubleshoot for Lü keyboard-remote

        1. Make sure the keyboard-remote is fully charged. 2. Ensure that it is set to “ON” and that a blue light is illuminated. If a blue light is flashing, the keyboard-remote’s battery is running low and needs to be charged. The red light will turn off ...

      • Möve - Lü isn't turning on

        General Power Make sure the power button is set to “On”. Turn on the projector using the projector controller. Unplug and reconnect the system’s power cable. Ensure that the head is properly inserted onto the mast. Still have questions? Contact us!

      • Change the color of the projector image

        If the color of your projector seems to have changed, press the Color Mode button using the projector remote control. We recommend that you select the Dynamic mode. Press the “Color Mode” button multiple time on the remote control to select another ...